Ceramic Pro Squall
A specialized coating designed for protecting windows and glass surfaces on marine vessels.
Ceramic Pro Squall is a specialized nano-ceramic protective coating designed for glass surfaces exposed to marine and coastal environments. It forms a clear, optically transparent layer that provides strong hydrophobic performance, reduces the adhesion of salt, water, and environmental contaminants, and supports easier cleaning and maintenance while preserving optical clarity. The coating is specifically formulated for the demanding conditions encountered on marine vessels and other glass surfaces exposed to seawater and coastal environments.
- ENERGY PRODUCTION
- INDUSTRIAL MACHINERY
- INFRASTRUCTURE
- MARINE
- OIL & GAS
Product Class
Layer-Forming Protective Coating / Hydrophobic Surface Treatment
Recommended Layers
1-2
Min. Intercoat Interval
25 minutes
Full Chemical Cure
72 hours
Consumption Per Layer
10-15 ml/m² per layer
Product Identification
- Product Name
- Ceramic Pro Squall
- Product Code
- R5MOS-S
- Product Version
- V1.0
- Manufacturer
- Nanoshine Group Corp.
- Country of Manufacture
- Taiwan (R.O.C.)
- TDS Revision
- V1.0-R3
- Issue Date
- 2026-09-01
Product Description
- Product Class
- Layer-Forming Protective Coating · Hydrophobic Surface Treatment
- Formulation System
- Solvent-Based
- Solvent / Carrier Type
- Hydrocarbon-Based
- Component Configuration
- Single-Component (1K)
- Technology
- Nano-Ceramic Coating Technology
- System Role
- Stand-Alone Coating
- Layering Type
- Multi-Layer Coating
- Curing Mode
- Ambient Cure · IR-Assisted Cure
- Coating Permanence
- Permanent
- Primary Functions
- Chemical Resistance · Environmental Contaminant Protection · UV Protection · Scratch / Mar Resistance · Stain Resistance · Hydrophobic Performance · Water Repellency · Contaminant Repellency · Self-Cleaning Performance · Reduced Surface Adhesion · Easier Maintenance · Optical Clarity
Typical Technical Properties
| Property | Value | Test Method / Standard |
|---|---|---|
| As Supplied | ||
| Density | 0.96-0.98 g/cm³ at 25 °C | Test Method / Standard: ASTM D1475 |
| Viscosity | <3 mPa·s at 20 °C | Test Method / Standard: ASTM D2196 |
| Cured Coating | ||
| Coating Thickness | Up to 0.1 micron | Test Method / Standard: ASTM B487 |
| Water Contact Angle | 125° | Test Method / Standard: ASTM D7334 |
The technical data stated in this document are based on internal laboratory testing, third-party testing where applicable, and current technical knowledge of the product.
Unless otherwise specified, all stated values are typical values obtained under controlled test conditions and are provided for technical reference. They should not be interpreted as guaranteed specification limits for every individual production batch.
Actual results may vary depending on substrate type and condition, application method, applied quantity or coating thickness, environmental conditions, curing conditions, and other application-specific factors. Where a specific test method, standard, substrate, or test condition is relevant to the interpretation of a reported value, it should be stated together with that value.
Appearance
- Liquid Appearance
- Clear, colorless, homogeneous liquid, free from visible particles or sediment
- Cured Appearance
- Clear and transparent
Intended Use and Substrates
Ceramic Pro Squall is primarily intended for the protection of glass surfaces on boats, yachts, and other marine vessels, where improved water repellency, resistance to salt and environmental contamination, optical clarity, and easier maintenance are required. It may also be used on compatible glass surfaces in other marine, coastal, and transportation applications exposed to seawater and harsh environmental conditions.
- Application Areas
- Marine · Transportation · Residential · Commercial · Industrial · Architectural · Infrastructure
Suitable Substrates
- Glass & Transparent Surfaces
- Automotive Glass · Architectural Glass · Other Glass Surfaces
- Surface Finish Compatibility & Retention
- Optical Clarity
- Use Environment
- Exterior
- Application Level
- Professional Use Only
Restrictions and Limitations
- Existing Surface Treatment Limitations
- Do not apply over existing waxes, sealants, hydrophobic treatments, or protective coatings unless specifically approved.
Surface Requirements
- Surface Cleanliness
- Fully Clean · Free from Oils, Grease, Silicone, Waxes, Polishing Residues, Existing Coatings (unrelated to the current build), and Other Contaminants
- Surface Moisture Condition
- Fully Dry
- Surface Temperature
- Recommended range: 10–30 °C
For complete substrate preparation procedures and product-specific preparation steps, refer to the current Installation Manual.
Application
- Application Method
- Applicator Application
- Recommended Ambient Temperature
- 25 °C
- Recommended Relative Humidity
- 50% RH
- Application Environment
- Clean, Dust-Free Indoor Area · Clean Controlled Area
- Recommended Layers
- 1-2
- Consumption Per Layer
- 10-15 ml/m² per layer
The application and curing times stated in this document are provided as reference values based on an ambient temperature of 25 °C, 50% relative humidity, and the typical coating thickness specified in this TDS. Actual timing may vary depending on substrate type and absorbency, application method, applied product quantity, final layer thickness after leveling, environmental conditions, and installer technique. The stated values should therefore be used as a technical reference rather than absolute process limits. During application, coating behavior should be observed and timing adjusted where necessary to achieve the intended result.
Application Timing and Curing
Flash Time
5-10 minutes after application
Flash Time for Ceramic Pro Squall: 5-10 minutes after application.
Levelling / Wipe-Off Window
1-3 minutes
Levelling / Wipe-Off Window for Ceramic Pro Squall: 1-3 minutes.
Minimum Intercoat Interval
25 minutes
Minimum Intercoat Interval for Ceramic Pro Squall: 25 minutes.
Maximum Intercoat Interval
40 minutes
Maximum Intercoat Interval for Ceramic Pro Squall: 40 minutes.
Tack-Free Time
1 hour
Tack-Free Time for Ceramic Pro Squall: 1 hour.
Water Contact Restriction
24 hours
Water Contact Restriction for Ceramic Pro Squall: 24 hours.
Release for Service / Delivery
1 hour
Release for Service / Delivery for Ceramic Pro Squall: 1 hour.
Time Before Washing
72 hours
Time Before Washing for Ceramic Pro Squall: 72 hours.
Full Chemical Cure
72 hours
Full Chemical Cure for Ceramic Pro Squall: 72 hours.
For accelerated or alternative curing procedures (if available), refer to the current Installation Manual.
Storage and Shelf Life
- Storage Temperature
- 5–25 °C
- Storage Conditions
- Store in a dry place. Do not freeze, overheat, or expose to direct sunlight.
- Shelf Life — Unopened
- 2 years in sealed packaging
- After Opening
- Use as soon as possible after opening.
Packaging
- Primary Container
- Glass Bottle · Aluminum Bottle
- Secondary Packaging
- Rigid Presentation Box
- Available Volumes
- Glass Bottle: 50 ml / Aluminum Bottle: 1 L
Health and Safety
Chemical product. Handle and use in accordance with the current Safety Data Sheet (SDS) and product label.
Refer to the current product Safety Data Sheet (SDS) for complete information on hazards, safe handling, personal protective equipment, first aid, storage, disposal, transport, and emergency measures.
Frequently Asked Questions
How many layers should I apply?+
Recommended layers for Ceramic Pro Squall: 1-2, at 10-15 ml/m² per layer.
How long should I wait between layers?+
The minimum intercoat interval for Ceramic Pro Squall is 25 minutes. The maximum interval is 40 minutes. Times are stated at 25 °C and 50% RH.
How long until the coating is fully cured?+
Ceramic Pro Squall reaches full chemical cure in 72 hours.
When can the coated surface be washed after application?+
Wait 72 hours after applying Ceramic Pro Squall before washing the surface.
When can the coated surface be exposed to rain or water?+
Keep a surface coated with Ceramic Pro Squall away from water contact for 24 hours after application.
What surfaces is it suitable for?+
Ceramic Pro Squall is suitable for glass & transparent surfaces.
What are the application temperature and humidity requirements?+
Apply Ceramic Pro Squall at 25 °C and 50% RH, with the surface at 10–30 °C. Application environment: clean, dust-free indoor area, clean controlled area.
What is the shelf life, and how long after opening can it be used?+
Unopened, Ceramic Pro Squall keeps for 2 years in sealed packaging, stored at 5–25 °C. Use as soon as possible after opening.
Can it be applied over another coating or wax?+
Do not apply Ceramic Pro Squall over existing waxes, sealants, hydrophobic treatments, or protective coatings unless specifically approved. The surface must be fully clean, free from oils, grease, silicone, waxes, polishing residues, existing coatings (unrelated to the current build), and other contaminants.
How is it applied?+
Application methods for Ceramic Pro Squall: applicator. Professional Use Only.
What does the cured coating look like?+
Cured Ceramic Pro Squall is clear and transparent.
The information and recommendations contained in this Technical Data Sheet are based on current product knowledge and the technical data available at the time of publication.
Actual product performance may vary depending on substrate type and condition, surface preparation, application method, environmental conditions, curing conditions, subsequent maintenance, and conditions of use. The product must be applied in accordance with the specified requirements and the current Installation Manual.
Users are responsible for verifying product suitability for the intended substrate and application, particularly where materials, conditions, or uses fall outside those specifically described or validated by the manufacturer.
This Technical Data Sheet does not replace the applicable Safety Data Sheet (SDS). Refer to the current product SDS for complete information regarding hazards, safe handling, personal protective equipment, first aid, storage, disposal, and emergency measures.
For complete surface preparation, application, curing, and installation procedures, refer to the current Ceramic Pro Installation Manual applicable to the product.
Always refer to the most recent published version of this Technical Data Sheet. Product specifications, formulations, recommendations, and supporting documentation may be updated as part of ongoing product development and technical review.
This document does not modify or replace any applicable product warranty terms or other contractual conditions.