Ceramic Pro ION Glass
Ceramic Pro ION Glass is a professional, single-component nano-ceramic protective coating specifically designed for automotive glass surfaces. It forms a clear, optically transparent protective layer that provides strong hydrophobic performance, resistance to environmental contamination, and improved durability under repeated wiper contact and everyday abrasion. The coating maintains the natural optical clarity of the glass while supporting improved water shedding and visibility in wet driving conditions.
- AUTOMOTIVE
- HOME
- INFRASTRUCTURE
Product Class
Hydrophobic Surface Treatment
Recommended Layers
1
Full Chemical Cure
72 hours
Consumption Per Layer
10-15 ml/m²
Product Identification
- Product Name
- Ceramic Pro ION Glass
- Product Code
- M700.1
- Product Version
- V1.0
- Manufacturer
- Nanoshine Group Corp.
- Country of Manufacture
- Taiwan (R.O.C.)
- TDS Revision
- V1.0-R3
- Issue Date
- 2026-09-01
Product Description
- Product Class
- Hydrophobic Surface Treatment
- Formulation System
- Solvent-Based
- Solvent / Carrier Type
- Hydrocarbon-Based
- Component Configuration
- Single-Component (1K)
- Technology
- Nano-Ceramic Coating Technology
- System Role
- Stand-Alone Coating
- Layering Type
- Single-Layer Coating
- Curing Mode
- Ambient Cure · IR-Assisted Cure
- Coating Permanence
- Permanent
- Primary Functions
- Environmental Contaminant Protection · UV Protection · Abrasion Resistance · Stain Resistance · Hydrophobic Performance · Water Repellency · Contaminant Repellency · Self-Cleaning Performance · Reduced Surface Adhesion · Easier Maintenance · Surface Slickness · Optical Clarity
Typical Technical Properties
| Property | Value | Test Method / Standard |
|---|---|---|
| As Supplied | ||
| Density | 0.96-0.98 g/cm³ at 25 °C | Test Method / Standard: ASTM D1475 |
| Viscosity | <5 mPa·s at 20 °C | Test Method / Standard: ASTM D2196 |
| Cured Coating | ||
| Coating Thickness | 1 micron | Test Method / Standard: ASTM B487 |
| Water Contact Angle | 125° | Test Method / Standard: ASTM D7334 |
The technical data stated in this document are based on internal laboratory testing, third-party testing where applicable, and current technical knowledge of the product.
Unless otherwise specified, all stated values are typical values obtained under controlled test conditions and are provided for technical reference. They should not be interpreted as guaranteed specification limits for every individual production batch.
Actual results may vary depending on substrate type and condition, application method, applied quantity or coating thickness, environmental conditions, curing conditions, and other application-specific factors. Where a specific test method, standard, substrate, or test condition is relevant to the interpretation of a reported value, it should be stated together with that value.
Appearance
- Liquid Appearance
- Clear, colorless, homogeneous liquid, free from visible particles or sediment
- Cured Appearance
- Clear and transparent
Intended Use and Substrates
Ceramic Pro ION Glass is primarily intended for professional protection of automotive glass surfaces, including windshields, side windows, and rear windows, where improved water repellency, optical clarity, easier maintenance, and resistance to repeated wiper contact are required. It may also be applied to compatible glass surfaces in other transportation, residential, and commercial applications.
- Application Areas
- Automotive · Transportation · Residential · Commercial · Industrial · Architectural · Infrastructure · Household Applications
Suitable Substrates
- Glass & Transparent Surfaces
- Automotive Glass · Architectural Glass · Other Glass Surfaces
- Surface Finish Compatibility & Retention
- Gloss — Preserved · Matte — Modified
- Use Environment
- Interior & Exterior
- Application Level
- Professional Use Only
Restrictions and Limitations
- Existing Surface Treatment Limitations
- Do not apply over existing waxes, sealants, hydrophobic treatments, or protective coatings unless specifically approved.
Surface Requirements
- Surface Cleanliness
- Fully Clean · Free from Oils, Grease, Silicone, Waxes, Polishing Residues, Existing Coatings (unrelated to the current build), and Other Contaminants
- Surface Moisture Condition
- Fully Dry
- Surface Temperature
- Recommended range: 10–30 °C
For complete substrate preparation procedures and product-specific preparation steps, refer to the current Installation Manual.
Application
- Application Method
- Applicator Application · Wipe Application
- Recommended Ambient Temperature
- 25 °C
- Recommended Relative Humidity
- 50% RH
- Application Environment
- Clean, Dust-Free Indoor Area · Clean Controlled Area
- Recommended Layers
- 1
- Consumption Per Layer
- 10-15 ml/m²
The application and curing times stated in this document are provided as reference values based on an ambient temperature of 25 °C, 50% relative humidity, and the typical coating thickness specified in this TDS. Actual timing may vary depending on substrate type and absorbency, application method, applied product quantity, final layer thickness after leveling, environmental conditions, and installer technique. The stated values should therefore be used as a technical reference rather than absolute process limits. During application, coating behavior should be observed and timing adjusted where necessary to achieve the intended result.
Application Timing and Curing
Flash Time
5-10 minutes after application
Flash Time for Ceramic Pro ION Glass: 5-10 minutes after application.
Levelling / Wipe-Off Window
1-3 minutes
Levelling / Wipe-Off Window for Ceramic Pro ION Glass: 1-3 minutes.
Tack-Free Time
1 hour
Tack-Free Time for Ceramic Pro ION Glass: 1 hour.
Water Contact Restriction
24 hours
Water Contact Restriction for Ceramic Pro ION Glass: 24 hours.
Release for Service / Delivery
1 hour
Release for Service / Delivery for Ceramic Pro ION Glass: 1 hour.
Time Before Washing
72 hours
Time Before Washing for Ceramic Pro ION Glass: 72 hours.
Full Chemical Cure
72 hours
Full Chemical Cure for Ceramic Pro ION Glass: 72 hours.
For accelerated or alternative curing procedures (if available), refer to the current Installation Manual.
Storage and Shelf Life
- Storage Temperature
- 5–25 °C
- Storage Conditions
- Store in a dry place. Do not freeze, overheat, or expose to direct sunlight.
- Shelf Life — Unopened
- 2 years in sealed packaging
- After Opening
- Use as soon as possible after opening.
Packaging
- Primary Container
- Glass Bottle
- Secondary Packaging
- Rigid Presentation Box
- Available Volumes
- 50 ml
Health and Safety
Chemical product. Handle and use in accordance with the current Safety Data Sheet (SDS) and product label.
Refer to the current product Safety Data Sheet (SDS) for complete information on hazards, safe handling, personal protective equipment, first aid, storage, disposal, transport, and emergency measures.
Frequently Asked Questions
How many layers should I apply?+
Recommended layers for Ceramic Pro ION Glass: 1, at 10-15 ml/m².
How long until the coating is fully cured?+
Ceramic Pro ION Glass reaches full chemical cure in 72 hours.
When can the coated surface be washed after application?+
Wait 72 hours after applying Ceramic Pro ION Glass before washing the surface.
When can the coated surface be exposed to rain or water?+
Keep a surface coated with Ceramic Pro ION Glass away from water contact for 24 hours after application.
What surfaces is it suitable for?+
Ceramic Pro ION Glass is suitable for glass & transparent surfaces.
What are the application temperature and humidity requirements?+
Apply Ceramic Pro ION Glass at 25 °C and 50% RH, with the surface at 10–30 °C. Application environment: clean, dust-free indoor area, clean controlled area.
What is the shelf life, and how long after opening can it be used?+
Unopened, Ceramic Pro ION Glass keeps for 2 years in sealed packaging, stored at 5–25 °C. Use as soon as possible after opening.
Can it be applied over another coating or wax?+
Do not apply Ceramic Pro ION Glass over existing waxes, sealants, hydrophobic treatments, or protective coatings unless specifically approved. The surface must be fully clean, free from oils, grease, silicone, waxes, polishing residues, existing coatings (unrelated to the current build), and other contaminants.
How is it applied?+
Application methods for Ceramic Pro ION Glass: applicator, wipe. Professional Use Only.
What does the cured coating look like?+
Cured Ceramic Pro ION Glass is clear and transparent.
How long does the coating last?+
Coating permanence for Ceramic Pro ION Glass: permanent.
The information and recommendations contained in this Technical Data Sheet are based on current product knowledge and the technical data available at the time of publication.
Actual product performance may vary depending on substrate type and condition, surface preparation, application method, environmental conditions, curing conditions, subsequent maintenance, and conditions of use. The product must be applied in accordance with the specified requirements and the current Installation Manual.
Users are responsible for verifying product suitability for the intended substrate and application, particularly where materials, conditions, or uses fall outside those specifically described or validated by the manufacturer.
This Technical Data Sheet does not replace the applicable Safety Data Sheet (SDS). Refer to the current product SDS for complete information regarding hazards, safe handling, personal protective equipment, first aid, storage, disposal, and emergency measures.
For complete surface preparation, application, curing, and installation procedures, refer to the current Ceramic Pro Installation Manual applicable to the product.
Always refer to the most recent published version of this Technical Data Sheet. Product specifications, formulations, recommendations, and supporting documentation may be updated as part of ongoing product development and technical review.
This document does not modify or replace any applicable product warranty terms or other contractual conditions.