Ceramic Pro LUX
A nano-ceramic coating for leather and leather-like materials. Protects against stains, UV fading and wear with no added gloss.
Ceramic Pro LUX is an advanced nano-ceramic protective coating developed for leather and leather-like materials, with particular emphasis on genuine and delicate leather. It provides resistance to contamination, staining, chemical exposure, UV radiation, fading, and everyday wear while adding hydrophobic and easy-to-clean properties. The formulation is specifically designed to preserve the original color, texture, appearance, and feel of the treated material without adding artificial gloss, stickiness, or a heavy surface finish. It is suitable for a wide range of leather goods and surfaces, including automotive interiors, furniture, accessories, and other high-quality leather products. Ceramic Pro LUX SIM may be used as a complementary preparation and compatibility-assessment step before application to help evaluate the expected visual and tactile result and prepare the surface for the LUX coating.
- AUTOMOTIVE
Product Class
Layer-Forming Protective Coating / Hydrophobic Surface Treatment
Recommended Layers
1+
Min. Intercoat Interval
40 minutes
Full Chemical Cure
7 days
Consumption Per Layer
20-25 ml/m² per layer
Product Identification
- Product Name
- Ceramic Pro LUX
- Product Code
- B770.2
- Product Version
- V1.0
- Manufacturer
- Nanoshine Group Corp.
- Country of Manufacture
- Taiwan (R.O.C.)
- TDS Revision
- V1.0-R3
- Issue Date
- 2026-09-01
Product Description
- Product Class
- Layer-Forming Protective Coating · Hydrophobic Surface Treatment
- Formulation System
- Solvent-Based
- Solvent / Carrier Type
- Hydrocarbon-Based
- Component Configuration
- Single-Component (1K)
- Technology
- Nano-Ceramic Coating Technology
- System Role
- Stand-Alone Coating
- Layering Type
- Multi-Layer Coating
- Curing Mode
- Ambient Cure
- Coating Permanence
- Permanent
- Primary Functions
- Chemical Resistance · Environmental Contaminant Protection · UV Protection · Stain Resistance · Hydrophobic Performance · Water Repellency · Contaminant Repellency · Self-Cleaning Performance · Reduced Surface Adhesion · Easier Maintenance · Finish Preservation · Wear Resistance
Typical Technical Properties
| Property | Value | Test Method / Standard |
|---|---|---|
| As Supplied | ||
| Density | 0.9 g/cm³ at 25 °C | Test Method / Standard: ASTM D1475 |
| Viscosity | 10 mPa·s at 20 °C | Test Method / Standard: ASTM D2196 |
| Cured Coating | ||
| Coating Thickness | <1 micron | Test Method / Standard: ASTM B487 |
| Water Contact Angle | 110° | Test Method / Standard: ASTM D7334 |
The technical data stated in this document are based on internal laboratory testing, third-party testing where applicable, and current technical knowledge of the product.
Unless otherwise specified, all stated values are typical values obtained under controlled test conditions and are provided for technical reference. They should not be interpreted as guaranteed specification limits for every individual production batch.
Actual results may vary depending on substrate type and condition, application method, applied quantity or coating thickness, environmental conditions, curing conditions, and other application-specific factors. Where a specific test method, standard, substrate, or test condition is relevant to the interpretation of a reported value, it should be stated together with that value.
Appearance
- Liquid Appearance
- Clear, colorless, homogeneous liquid, free from visible particles or sediment
- Cured Appearance
- Clear and transparent, nonreflective
Intended Use and Substrates
Ceramic Pro LUX is intended for the protection of compatible leather and leather-like materials, with particular emphasis on genuine, delicate, and high-quality leather. It is suitable for automotive interiors, furniture, accessories, luxury goods, and other leather products where resistance to staining, contamination, UV exposure, moisture, and everyday wear is required without significantly altering the original color, texture, appearance, or feel of the material.
- Application Areas
- Automotive · Transportation · Residential · Commercial · Consumer & Luxury Goods · Household Applications
Suitable Substrates
- Leather & Leather-Like Materials
- Natural Leather · Synthetic Leather
- Surface Finish Compatibility & Retention
- Gloss — Preserved · Satin — Preserved · Matte — Preserved
- Use Environment
- Interior & Exterior
- Application Level
- Professional Use Only
Restrictions and Limitations
- Existing Surface Treatment Limitations
- Do not apply over existing waxes, sealants, hydrophobic treatments, or protective coatings
Surface Requirements
- Surface Cleanliness
- Fully Clean · Free from Oils, Grease, Silicone, Waxes, Polishing Residues, Existing Coatings (unrelated to the current build), and Other Contaminants
- Surface Moisture Condition
- Fully Dry
- Surface Temperature
- Recommended range: 10–30 °C
- Existing Coating / Paint Condition
- Fully Cured
- Additional Requirements
- For best performance, the surface must be treated with Ceramic Pro LUX SIM prior to the application.
For complete substrate preparation procedures and product-specific preparation steps, refer to the current Installation Manual.
Application
- Application Method
- Applicator Application
- Recommended Ambient Temperature
- 25 °C
- Recommended Relative Humidity
- 50% RH
- Application Environment
- Clean, Dust-Free Indoor Area
- Recommended Layers
- 1+
- Consumption Per Layer
- 20-25 ml/m² per layer
The application and curing times stated in this document are provided as reference values based on an ambient temperature of 25 °C, 50% relative humidity, and the typical coating thickness specified in this TDS. Actual timing may vary depending on substrate type and absorbency, application method, applied product quantity, final layer thickness after leveling, environmental conditions, and installer technique. The stated values should therefore be used as a technical reference rather than absolute process limits. During application, coating behavior should be observed and timing adjusted where necessary to achieve the intended result.
Application Timing and Curing
Flash Time
30-60 seconds after application
Flash Time for Ceramic Pro LUX: 30-60 seconds after application.
Levelling / Wipe-Off Window
approximately 60 seconds
Levelling / Wipe-Off Window for Ceramic Pro LUX: approximately 60 seconds.
Minimum Intercoat Interval
40 minutes
Minimum Intercoat Interval for Ceramic Pro LUX: 40 minutes.
Maximum Intercoat Interval
60 minutes
Maximum Intercoat Interval for Ceramic Pro LUX: 60 minutes.
Tack-Free Time
1 hour
Tack-Free Time for Ceramic Pro LUX: 1 hour.
Water Contact Restriction
24 hours
Water Contact Restriction for Ceramic Pro LUX: 24 hours.
Release for Service / Delivery
24 hours
Release for Service / Delivery for Ceramic Pro LUX: 24 hours.
Time Before Washing
7 days
Time Before Washing for Ceramic Pro LUX: 7 days.
Full Chemical Cure
7 days
Full Chemical Cure for Ceramic Pro LUX: 7 days.
For accelerated or alternative curing procedures (if available), refer to the current Installation Manual.
Storage and Shelf Life
- Storage Temperature
- 5–25 °C
- Storage Conditions
- Store in a dry place. Do not freeze, overheat, or expose to direct sunlight.
- Shelf Life — Unopened
- 2 years in sealed packaging
- After Opening
- Use as soon as possible after opening.
Packaging
- Primary Container
- Glass Bottle
- Secondary Packaging
- Rigid Presentation Box
- Available Volumes
- 50 ml
Health and Safety
Chemical product. Handle and use in accordance with the current Safety Data Sheet (SDS) and product label.
Refer to the current product Safety Data Sheet (SDS) for complete information on hazards, safe handling, personal protective equipment, first aid, storage, disposal, transport, and emergency measures.
Frequently Asked Questions
How many layers should I apply?+
Recommended layers for Ceramic Pro LUX: 1+, at 20-25 ml/m² per layer.
How long should I wait between layers?+
The minimum intercoat interval for Ceramic Pro LUX is 40 minutes. The maximum interval is 60 minutes. Times are stated at 25 °C and 50% RH.
How long until the coating is fully cured?+
Ceramic Pro LUX reaches full chemical cure in 7 days.
When can the coated surface be washed after application?+
Wait 7 days after applying Ceramic Pro LUX before washing the surface.
When can the coated surface be exposed to rain or water?+
Keep a surface coated with Ceramic Pro LUX away from water contact for 24 hours after application.
What surfaces is it suitable for?+
Ceramic Pro LUX is suitable for leather & leather-like materials.
What are the application temperature and humidity requirements?+
Apply Ceramic Pro LUX at 25 °C and 50% RH, with the surface at 10–30 °C. Application environment: clean, dust-free indoor area.
What is the shelf life, and how long after opening can it be used?+
Unopened, Ceramic Pro LUX keeps for 2 years in sealed packaging, stored at 5–25 °C. Use as soon as possible after opening.
Can it be applied over another coating or wax?+
Do not apply Ceramic Pro LUX over existing waxes, sealants, hydrophobic treatments, or protective coatings. The surface must be fully clean, free from oils, grease, silicone, waxes, polishing residues, existing coatings (unrelated to the current build), and other contaminants.
Which Ceramic Pro products is it used with?+
For best performance, the surface must be treated with Ceramic Pro LUX SIM prior to the application.
How is it applied?+
Application methods for Ceramic Pro LUX: applicator. Professional Use Only.
Tested & Certified
Laboratory test reports and certifications for this product
The information and recommendations contained in this Technical Data Sheet are based on current product knowledge and the technical data available at the time of publication.
Actual product performance may vary depending on substrate type and condition, surface preparation, application method, environmental conditions, curing conditions, subsequent maintenance, and conditions of use. The product must be applied in accordance with the specified requirements and the current Installation Manual.
Users are responsible for verifying product suitability for the intended substrate and application, particularly where materials, conditions, or uses fall outside those specifically described or validated by the manufacturer.
This Technical Data Sheet does not replace the applicable Safety Data Sheet (SDS). Refer to the current product SDS for complete information regarding hazards, safe handling, personal protective equipment, first aid, storage, disposal, and emergency measures.
For complete surface preparation, application, curing, and installation procedures, refer to the current Ceramic Pro Installation Manual applicable to the product.
Always refer to the most recent published version of this Technical Data Sheet. Product specifications, formulations, recommendations, and supporting documentation may be updated as part of ongoing product development and technical review.
This document does not modify or replace any applicable product warranty terms or other contractual conditions.